Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lost their key to their car may be concerned about the expense and inconvenience of adding another one. You can save these expenses by making your key fob yourself.
You'll require a phillips screwdriver that is flathead to accomplish this. Insert the screwdriver into the slot located in the middle of the case, and slowly push it open.
Cost
Some used cars have only one key, whereas most SAABs have two keys. In this instance the owner will need to purchase a new key. This can be expensive. There are several ways to cut down on this process. If you just need to replace the key fob case and not the emergency key or badge, you can save some money by buying a used case from a dealer. However, you must be aware that these cases do not include the badge or emergency key and are susceptible to wearing out quickly.
In addition to the cost of a brand new key, you will also need to pay for the installation and programming of the TWICE module. These expenses can quickly increase especially if there's no spare key.
It is important to always have two keys in your vehicle. If you lose the only key, you won't be stranded without transportation.
It's not as difficult as it might seem to add another key for the Saab 9-3. The only problem is that you must connect the key to the car's computer. This can be accomplished by an auto dealer, however it might take a while to schedule an appointment. You can find all the info you require on the internet to guide you through the process.
Installation
Most Saab vehicles built after 1995 come with a special immobilizer that makes use of a key-fob for controlling the car's engine. The system also controls door locks as well as remote functions of the car. It is vital to have an extra spare key in case you lose your original key and thereby having your vehicle stolen. The positive side is that if you lose your only working Saab key, there are ways to replace it without having to pay for an expensive dealer service.
The first step is to prepare the new key fob. It is done by using a flathead screwdriver to pry the case open. Simply place the screwdriver in a small hole in the middle of the case and gently work it. If you're having trouble, try using different angles. Once you've opened up the case, take out the electronics and place them in a brand-new fob case.
saab 93 key fob can begin the programming process when you have the fob and key replacement. You'll need to connect your Tech2 and follow the steps for the NG 9-3 (with or without the key). It is recommended that you use a replacement TWICE unit that is already connected to the correct key using a transponder. It is possible to find this unit on the internet. However, you must make sure that it is an OEM replacement.
Programming
Tech 2 Tech 2 is required to add a second key to a Saab 9-3. This also requires programming the vehicle to recognize the new keys. This is a far more complex process than just copying a key made of metal. It must be done by a professional to avoid damaging the electronic system of the vehicle. If you're considering adding a spare key for your car, you should try to do it as quickly as you can. If you delay it could cost you a lot more in future.
You'll also have to replace either the CIM or TWICE modules. This is typically an order by mail and not something you can do with an aftermarket supplier. Based on the car model it could cost quite high.
There's an alternative to the dealer who will charge you top dollar to replace your vehicle's computer. S.A. Locksmith & Security can re-program the embedded memory in your Saab computer and prepare your vehicle for the new key, thereby saving you the cost of a brand new car computer! This service is fast and cost-effective, as well as easy. It could save you 50% or more compared to what a dealership will charge you! This is a fantastic solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen was one of the most distinctive vehicles to ever bear the Saab badge. It was an Scandinavian front-drive fighter jet-inspired monster that was swift and fun to drive. There were many other Saab models were released, but none were as wacky.
If you have a 9-3 Saab and lose your key fob, it's crucial to replace it as quickly as possible. Contrary to the more popular European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a special key to begin. If you have a spare key, the replacement process is easy. But if you do not have one, it can be costly and time-consuming.
You can save money if you purchase an old key fob replacement and have it programmed locally by locksmiths. However, you should be careful about purchasing used keys on eBay and other online stores. They might not be authentic and you could pay more at the end.
The removal of the battery and electronics from the old key fob is a simple procedure that anyone can complete using a small screwdriver. Be cautious not to scratch any of the tiny electronic components inside the case. Be careful not to pour liquids into the case because this could cause damage. You should also avoid buying cloned keys from aftermarket sellers, since they might not have been paired with the CIM of your car.